The Generator uses full power of both elements to heat up the room to the pre-set temperature and then automatically reduces power to half its elements, resulting in a more consistent flow of soft billowing steam and a more stable room temperature. This simple yet very effective feature minimizes temperature variations and delivers an even flow of steam.

“Auto Drain & fresh flush”
The “Auto Drain & Fresh Flush” feature is standard on all generators. After each and every bathing session the generator automatically drains and is flushed with fresh water to reduce sediment build up and provide longer element life. The generator remains empty until the next bathing session when the generator is filled with fresh water for a safer, hygienic and more pleasant bathing experience.

“Warm Touch” inlet
The “Warm Touch” steam inlet has been designed to provide as safe as possible bathing experience. An internal insulator delivers steam into the room while the external chrome plated brass surface remains much cooler reducing risk of burns. A fragrance reservoir on the inlet allows the addition of fragrances to enhance the bathing experience.

“S” Controls
The brass chrome plated “S” button control provides On/Off control and has a built-in 30 minute operational timer and temperature adjustment. The “S” control maybe located inside or outside of the . The “S” control is supplied with remote temperature sensor that is to be located within the SteamSpa

Electrical Information Chart 

NOTE: *AK12 requires two (2) separate electrical supply lines and two (2) steam inlets.

Multiple units for large SteamSPA rooms  

AK17 & AK20 include two (2) generators connected to function as one (1) system via one (1) control. 
AK30 includes three (3) generators connected to function as one (1) system via one (1) control.

3K20, 3K24 & 3K28 include two (2) generators connected to function as one (1) system via (1) control. 
3K36  includes three (3) generators connected to function as one (1) system via one (1) control.

Multiple ganged systems require one (1) steam inlet, (1) auto-drain & fresh flush system for each generator – supplied as standard.

Important:

* Use only copper wire rated 600V- @ 75 Celsius min

* All models require Earth Connection and to be installed by licensed electrician

* A Dedicated electrical supply line protected via an Earth Leakage Circuit Breaker (ELCB) with a maximum trip current of 30 milliamps is required.

* 3 Phase units require a Neutral.

* Generator must be connected to a means of disconnecting all mains supply connections after installation.

OPTIONS

D3 – 3 button control
The brass chrome plated “D3” 3 button digital control provides On/Off control, Temperature setting, and time duration setting adjustable to 60 minutes.

Model: D3-3 Button Control Item Number: 9101-101         

Q Light – variable colour mood lighting for in-room ceiling mounting. Supplied with transformer.

Model: Q Light Item Number: 113-003            

Q Fan – circulation fan rotates air inside  with ceiling heights greater than 2.4 metres (8ft) to reduce temperature variation from ceiling to floor.

Model: Q Fan Item Number: 115-001            

SteamSPA Accessories